What up!

Bansheenut420 · 07-26-2009, 03:39 AM

Been a lurker here for a while. Know quite a few of you, and am happy to be apart of a great group of car people.

Its nice to find. Here is a little bit about my whoopty.

Full Mod list.
ENGINE
-2.2l T3 shortblock
-Venolia forged pistons
-polished forged crank, balanced
-shot peened forged rods with re-drilled tops
-sealed power rings
-clevite main and rod bearings
-ARP hardware
-melling high volume oil pump
-Ishihara-jonhson windage tray and oil pan baffle,
-Balance shafts removed

HEAD/INTAKE
-ARP headstuds
-Cometic .074" mls headgasket
-LoneWolf performance head with stage one port/polish .(***Running STOCK head for now, while nice head is being "worked on"***)
-Stock valves (for now :evil:)
-upgraded GEN3 FWD Performance lifters
-FWD Performance custom Titanium Valve spring retainers.
-LoneWolf performance stage one cams
-LoneWolf performance ported intake manifold
-FWD Performance ADJ. Cam gears
-58mm Throttle body
-4" Custom cold air intake
-Spearco 1010 CFM fmic with mandrel bent 2.5" pipeing
-TurboXS RFL BOV

EXHAUST/TURBO
-Holset HX-40pro Turbo with hogged out BEP turbine housing
-TurboConcepts 38mm external wastegate (with 1 bar spring)
-Custom 3" mandrel bent Downpipe with external wastegate dump
-LoneWolf Performance ported and thermal coated exhaust manifold drilled and tapped for EGT probe.
-3" mandrel bent SS exhaust
-3" Downpipe dump with electronic dump valve
-3"Magnaflow hiflow cat
-3"Magnaflow muffler

FUEL/INGITION
-Accufab AFPR
-58lb/hr injectors
-High flow billet fuel rail
-an fuel line
-Walbro 255 fuel pump
-DevilsOwn Progressive meth injection (28gph dual jet setup)
-FWD Performance Ground wire kit
-Aroura 8.5mm wires

TRANS/CLUTCH
-"Built" A568 trans. from FWD Performance
-Quaife LSD
-B&M short throw shifter
-Solid shifter bushings
-Fidanza light weight flywheel
-Clutchnet 6 puck sintered copper/ceramic clutch disk
-FWD Performance dual diaphragm pressure plate

ELECTRONICS/CONTROL/MONOTORING
-FWD Performance Custom 3 bar calibration with 7.5K revlimit
-HDI 2 stage Electronic boost controller
-Zeitronix wideband o2 meter with wideband o2, egt, boost, rpm, and tps monitoring and datalogging.
-OTC 2000 scanner/datalogger
-Zeitronix LCD display (displays EGT, wideband, lamda, boost in car without datalogging)
-AutoMeter boost gauge
-AutoMeter Oil pressure gauge

TIRES/WHEELS/SUSPENSION
17" RaceLine 6 spoke Gloss black wheels with polished lip
17" Firestone firehawks
-M/T ETdrag drag slicks 24.5x8x15 (VHT soaked)
-BGF T/A drag radials 225x50x25 (VHT soaked)
-strut tower bar
-PolyBushings.com poly motor mounts
-Solid bobble strut

"OTHER GOODIES"
-Vac Dist block with all silicone line
-Oil cooler
-180 deg thermo.
-ported waterpump

-JVC G-820 CD/mp3/ipod reciver
-3.5"JBL dash speakers
-5.25"AudioArt midbass
-5x8" Polk audio rears
-(2) 12w3 JL Audio subs
-Custom box
-250w mono jl audio high currant amp
-400w Blaupunkt 4 channel amp
-Cobra radar detector
-Stock alarm
-Viper car alarm

A few pics.

A little video of including my last track run (12.34@111 on low boost)
http://videos.streetfire.net/video/I...ing_697109.htm

Looking forward to meeting more of you.

General Chaos · 07-26-2009, 09:12 AM

Welcome to the site. I really like the looks of your Dodge Daytona IROC R/T, what year is it?

MARCO88 · 07-26-2009, 09:15 AM

This might sound stupid and I apologize in advance, but man I've never even heard of a Daytona RT. I'm assuming it has something to do with Dodge cause of the RT thing, am I correct? But yeah dude your car is nice, well built and all that. Good shit. We got a fat meet coming up soon, you should bring that beast by. Welcome to the site sir

bullfrg · 07-26-2009, 09:34 AM

Welcome to the site.

MsRae · 07-26-2009, 11:29 AM

Thanks for posting up Bansheenut! Glad to have you on the site.

Justin Sane · 07-26-2009, 12:21 PM

Nice car, thats a looooooong spoiler you got there.

Bansheenut420 · 07-26-2009, 02:58 PM

Quote:

Originally Posted by General Chaos

Welcome to the site. I really like the looks of your Dodge Daytona IROC R/T, what year is it?

Thanks alot. Its a 1992. Its actually a Pre Vehilce Production car. One of the 1st 5 made. Chrysler owned it for the first part of its life.

Quote:

Originally Posted by MARCO88

This might sound stupid and I apologize in advance, but man I've never even heard of a Daytona RT. I'm assuming it has something to do with Dodge cause of the RT thing, am I correct? But yeah dude your car is nice, well built and all that. Good shit. We got a fat meet coming up soon, you should bring that beast by. Welcome to the site sir

Yeah, its a Dodge Dayton IROC R/T. They only build 432 of the IROC R/T with the dohc motor. And the body style was used in the International Race of Champions for a while.

Quote:

Originally Posted by bullfrg

Welcome to the site.

Thanks much!

Quote:

Originally Posted by MsRae

Thanks for posting up Bansheenut! Glad to have you on the site.

No prob. It was meeting you and your husband that got me really wanting to post up here. Thanks.

Quote:

Originally Posted by Justin Sane

Nice car, thats a looooooong spoiler you got there.

Thanks.

Michael · 07-26-2009, 03:04 PM

Well Welcome to the forum. Will you be out at the next RMR?

Bansheenut420 · 07-26-2009, 03:30 PM

Yes, I plan on being at the aug 7 midnights. Hoping for atleast a 11.99 on low boost again. I am pretty sure the car has it in it. Just need to bog less on the launch, and I already fixed the spark blowout issue.

rb25nissan19 · 07-26-2009, 03:33 PM

Welcome to the site!